Becker SV5.190/1 2.2kW Side Channel Blower
The Becker SV5.190/1 is a single-stage side channel blower providing 180 m³/h nominal airflow with strong vacuum performance from a 2.2kW motor.
Maximum relative vacuum is -200 mbar and maximum positive pressure is +180 mbar at 50 Hz. This combination provides useful operating differential on both sides of the blower and makes the SV5.190/1 particularly capable in industrial suction applications.
Non-contact regenerative compression produces a continuous oil-free airflow suitable for machinery, handling equipment and process-air systems.
Becker SV blower supply and technical support from Vacuum Pumps UK.
Need an SV5.190/1?
Tell us about the existing blower or the airflow and vacuum or pressure duty required.
Vacuum Pumps UK can assist with supply and technical selection.
Blower Type
Single Stage
side channel blower
Nominal Capacity
180 m³/h
at 50 Hz
Maximum Vacuum
-200 mbar
relative at 50 Hz
Maximum Pressure
+180 mbar
relative at 50 Hz
Motor Power
2.2kW
50 Hz motor
180 m³/h Blower with Strong Vacuum Capability
With a nominal capacity of 180 m³/h, the Becker SV5.190/1 provides a significant volume of process air while its 2.2kW motor enables the blower to operate at up to -200 mbar relative vacuum.
The same unit can also be applied to positive-pressure systems, with maximum relative pressure of +180 mbar. This gives the SV5.190/1 a useful combination of airflow and differential for machinery requiring either suction or blowing air.
The impeller rotates within the blower housing without contact. Air entering the blower is repeatedly accelerated between the impeller and side channel, progressively increasing its energy until it leaves the outlet.
This regenerative principle avoids the need for oil in the process-air chamber and eliminates rubbing vanes from the compression mechanism. The result is continuous oil-free airflow with relatively straightforward routine maintenance requirements.
When selecting the SV5.190/1 for an application, the complete system resistance should be considered. The nominal 180 m³/h figure describes blower capacity, while actual airflow at the working point will depend upon the vacuum or pressure differential imposed by the installation.
Becker SV5.190/1 Technical Specification
The SV5.190/1 combines a 2.2kW motor with 180 m³/h nominal airflow, -200 mbar maximum relative vacuum and +180 mbar maximum relative positive pressure at 50 Hz.
| Model | Stage | Nominal Capacity | Maximum Vacuum | Maximum Pressure | Motor Power |
| SV5.190/1 | Single | 180 m³/h | -200 mbar | +180 mbar | 2.2kW |
SV5.190/1 Performance and Design
180 m³/h Airflow
Provides substantial process-air volume for machinery and industrial handling systems.
-200 mbar Vacuum
Strong suction capability for vacuum handling and other higher-differential duties.
+180 mbar Pressure
Allows use in positive-pressure process-air and conveying applications.
2.2kW Motor
Provides the power required to maintain useful differential across industrial operating conditions.
Oil-Free Air Path
The process-air chamber operates without lubricating oil.
Non-Contact Principle
The rotating impeller does not rely on rubbing compression elements to generate airflow.
Industrial Uses for the SV5.190/1
The combination of 180 m³/h airflow and -200 mbar maximum vacuum makes this model particularly useful for industrial applications requiring stronger suction performance from a single-stage side channel blower.
› Vacuum lifting and handling
› Printing and paper machinery
› Packaging and processing equipment
› Sheet transport systems
› Pneumatic transport
› Drying processes
› Cooling and water aeration
› Industrial process-air systems
Becker SV5.190/1 Supply and Replacement
Vacuum Pumps UK can assist with SV5.190/1 requirements for existing machinery, replacement installations and new vacuum or positive-pressure applications.
If you are replacing an existing Becker blower, send us the model and motor nameplate details. Information about the machine, pipework and operating duty can also be useful where the original blower specification needs to be checked.
For a new application, airflow should be considered together with the required working vacuum or positive pressure. Selecting solely from the nominal m³/h figure can result in an incorrectly sized blower where system resistance is significant.
Becker SV5.190/1 Accessories
Correctly selected accessories can protect the blower, control operating vacuum or pressure and help integrate the SV5.190/1 into existing machinery.
Inlet Filtration
Filter housings and elements help prevent airborne contamination entering the blower.
Vacuum Relief
Vacuum relief valves can limit operating differential and help protect the blower from excessive restriction.
Pressure Relief
Pressure relief provides protection where the blower is being used to generate positive pressure.
Installation Components
Silencers, non-return valves, connection components and other accessories can be selected for the installation.
Becker SV5.190/1 Service, Repair and Spare Parts
Although the SV5.190/1 uses non-contact compression, the motor, bearings and connected air system remain important to reliable operation. Contamination or increasing pipework restriction can also affect airflow and operating temperature.
Vacuum Pumps UK can assist with inspection, fault diagnosis, servicing and repair requirements for Becker side channel blowers.
Blower Service
Technical support for Becker SV blower maintenance and performance issues.
Blower Repair
Workshop inspection and repair assessment for noisy, damaged or under-performing blowers.
Spare Parts
Replacement filters and Becker spare parts are available through our sister company VacAir Superstore.
Becker SV5.190/1 Frequently Asked Questions
What is the capacity of the Becker SV5.190/1?
The nominal capacity is 180 m³/h at 50 Hz.
What maximum vacuum does the SV5.190/1 provide?
Maximum relative vacuum is -200 mbar.
What maximum positive pressure does it provide?
The maximum relative positive pressure is +180 mbar.
What motor power does this SV5.190/1 use?
This configuration uses a 2.2kW motor.
Is the SV5.190/1 suitable for vacuum handling?
Its 180 m³/h nominal capacity and -200 mbar maximum relative vacuum make it suitable for a range of industrial vacuum handling duties, subject to correct application sizing.
Can Vacuum Pumps UK service or repair an SV5.190/1?
Yes. We can assist with Becker side channel blower servicing, fault investigation and workshop repair requirements.
Need a Becker SV5.190/1 2.2kW Side Channel Blower?
Contact Vacuum Pumps UK for blower supply, technical advice, servicing and repair.
Speak to our Experts
Email Our Team
Fast quotations and expert advice