Becker SV5.490/1 5.5kW Side Channel Blower
The Becker SV5.490/1 combines 480 m³/h nominal capacity with strong differential performance from a single-stage side channel blower.
At 50 Hz, the 5.5kW configuration provides maximum relative vacuum of -300 mbar and maximum positive pressure of +280 mbar. This combination allows the blower to move a high volume of air while working against considerably greater system resistance than lower-differential models.
The non-contact regenerative compression principle provides continuous oil-free process airflow for industrial machinery, conveying equipment and vacuum or pressure systems.
Becker blower supply and technical support from Vacuum Pumps UK.
Replacing an SV5.490/1?
Send us the complete blower and motor details together with information about the application.
We can help identify the required replacement and operating duty.
Blower Type
Single Stage
side channel blower
Nominal Capacity
480 m³/h
at 50 Hz
Maximum Vacuum
-300 mbar
relative at 50 Hz
Maximum Pressure
+280 mbar
relative at 50 Hz
Motor Power
5.5kW
50 Hz motor
High Airflow and Strong Operating Differential
The SV5.490/1 provides a different performance balance from the SV5.430/1. Although nominal airflow increases only to 480 m³/h, the available differential rises considerably, reaching -300 mbar relative vacuum and +280 mbar relative pressure.
This makes the SV5.490/1 suitable for applications where the blower must not only move a significant volume of air but also overcome appreciable restriction within the connected machinery, pipework or process.
During operation, the impeller repeatedly accelerates air through the annular side channel. Energy is progressively transferred to the air as it circulates around the housing, allowing differential pressure to develop before the air reaches the outlet.
The process does not require lubricating oil within the compression chamber, and there is no rubbing contact between the impeller and housing. The result is continuous oil-free airflow suitable for many industrial vacuum and pressure duties.
Correct sizing should always consider the required operating point rather than comparing nominal capacity alone. A blower required to provide airflow at -250 mbar, for example, is operating under very different conditions from one moving air through a relatively unrestricted system.
Becker SV5.490/1 Technical Specification
At 50 Hz, the SV5.490/1 5.5kW provides 480 m³/h nominal capacity, maximum relative vacuum of -300 mbar and maximum relative positive pressure of +280 mbar.
| Model | Stage | Nominal Capacity | Maximum Vacuum | Maximum Pressure | Motor Power |
| SV5.490/1 | Single | 480 m³/h | -300 mbar | +280 mbar | 5.5kW |
SV5.490/1 Performance Features
480 m³/h Airflow
Provides high nominal capacity for larger industrial machines and process-air installations.
-300 mbar Vacuum
Strong vacuum differential provides capability for demanding suction and handling applications.
+280 mbar Pressure
Substantial discharge pressure suits conveying, blowing and process-air systems with increased resistance.
5.5kW Motor
Supports the combination of high airflow and stronger operating differential provided by this model.
Oil-Free Process
Side channel compression requires no lubricating oil within the process-air chamber.
Continuous Air Supply
Regenerative compression creates smooth continuous airflow for industrial machine and process duties.
SV5.490/1 Industrial Applications
The combination of 480 m³/h nominal capacity and high differential allows the SV5.490/1 to serve applications requiring both substantial air volume and stronger vacuum or pressure performance.
› Vacuum lifting and handling systems
› Printing and paper machinery
› Packaging and production equipment
› Vacuum hold-down applications
› Pneumatic conveying
› Material transport systems
› Drying, cooling and waste water aeration
› Industrial process vacuum and pressure
SV5.490/1 Replacement and Application Support
When replacing an existing SV5.490/1, the complete blower and motor nameplate information should be checked. Electrical details and the original application can be important when confirming the appropriate replacement configuration.
Where the blower is being selected for a new process, the required airflow should be considered at the actual operating differential. Pipework losses, filters, silencers, valves and process restrictions can all influence the blower operating point.
Vacuum Pumps UK can assist with Becker blower identification, application review and replacement selection.
Becker SV5.490/1 Accessories
The higher differential capability of the SV5.490/1 makes correct filtration and relief protection particularly important when the blower is integrated into a restricted vacuum or pressure system.
Inlet Filters
Correct filtration protects the blower from dust and contamination entering with the process air.
Vacuum Relief
Vacuum regulation can limit excessive suction differential if inlet resistance increases unexpectedly.
Pressure Relief
Pressure protection can control maximum discharge differential in positive-pressure applications.
System Accessories
Silencers, flexible connections, non-return valves and pipework components can complete the installation.
Becker SV5.490/1 Service, Repair and Spare Parts
Loss of airflow or differential on an SV5.490/1 can result from blower condition or from changes elsewhere in the system. Filters, pipe restrictions and process conditions should be considered alongside bearing, motor and blower condition when investigating performance problems.
Vacuum Pumps UK can assist with inspection, fault diagnosis, servicing and workshop repair of Becker side channel blowers.
Service
Technical support and maintenance assistance for Becker SV blowers in industrial service.
Repair
Workshop inspection for bearing noise, motor faults, damage or reduced blower performance.
Spare Parts
Becker filters and replacement components are available through our sister company VacAir Superstore.
Becker SV5.490/1 Frequently Asked Questions
What is the capacity of the Becker SV5.490/1?
The nominal capacity is 480 m³/h at 50 Hz.
What is the maximum vacuum?
The SV5.490/1 provides maximum relative vacuum of -300 mbar.
What pressure can the SV5.490/1 produce?
Maximum relative positive pressure is +280 mbar.
What motor power is fitted to this configuration?
This SV5.490/1 configuration uses a 5.5kW motor at 50 Hz.
Does the SV5.490/1 provide oil-free process air?
Yes. Lubricating oil is not required within the side channel compression chamber.
Can Vacuum Pumps UK help replace or repair an SV5.490/1?
Yes. We can assist with replacement identification, application selection, servicing, workshop repair and spare parts requirements.
Becker SV5.490/1 Supply, Service and Support
Contact Vacuum Pumps UK for Becker side channel blower supply, technical advice, servicing and repair.
Speak to our Experts
Email Our Team
Fast quotations and expert advice