Busch SECO SV1010C Vacuum Pump
The Busch SECO SV1010C is a dry-running rotary vane vacuum pump developed for printing, paper, packaging and handling equipment requiring dependable dry vacuum performance.
Vacuum Pumps UK can assist with Busch pump supply, replacement advice and application checks. If the installation does not require the exact Busch model, the DVP SB10 can be assessed as a practical oil-free alternative.
Dry-running Busch support, DVP alternatives, carbon vanes and technical application advice.
Need help matching a dry-running pump?
Send us the existing pump nameplate, machine details and required vacuum duty.
Pump Type
Dry Running
rotary vane
Capacity
10 / 12
m³/h 50Hz / 60Hz
Ultimate Vacuum
150 mbar
absolute
Motor Power
0.37 / 0.37
kW 50Hz / 60Hz
Busch SECO SV1010C Overview
The Busch SECO SV1010C uses dry-running rotary vane technology, with self-lubricating carbon vanes operating without lubricating oil inside the compression chamber. That makes this type of pump particularly useful where an oil-free vacuum source is required.
At 50Hz the pump delivers 10 m³/h, increasing to 12 m³/h at 60Hz. Its stated ultimate pressure is 150 mbar absolute.
Unlike an oil-lubricated rotary vane pump, routine maintenance centres on vane condition, inlet filtration, cooling and general internal cleanliness. Carbon vanes are a normal wearing component and should be inspected before they reach their minimum permissible length.
Busch SECO SV1010C Technical Specifications
The figures below are the key performance data for the Busch SECO SV1010C. Electrical supply, connections, installation position and machine duty should be checked before replacement.
| Model | Nominal Capacity m³/h 50Hz / 60Hz |
Maximum Vacuum mbar absolute |
Motor Power kW 50Hz / 60Hz |
| Busch SECO SV1010C | 10 / 12 | 150 | 0.37 / 0.37 |
Typical Applications for the Busch SECO SV1010C
Dry-running vane pumps of this size are commonly used where clean suction and dependable repetitive operation are required.
› automatic feeding equipment
› suction lifting systems
› woodworking and clamping equipment
› small process machinery
› printing and graphics equipment
DVP SB10
Oil-free dry-running alternative
Comparable DVP Alternative
Consider the DVP SB10
Where an exact Busch replacement is not essential, the DVP SB10 can be considered as a very closely matched dry-running rotary vane alternative.
The DVP SB10 provides 10 / 12 m³/h at 50Hz / 60Hz and has a stated final pressure of 120 mbar absolute. Compared with the Busch pump, this gives a deeper stated vacuum.
Both technologies use oil-free rotary vane operation with carbon vanes, but the mounting arrangement, inlet and exhaust connections, motor details, cooling requirements and permitted operating pressure must be checked before changing pump model.
Vacuum Pumps UK is the UK and Ireland Master Agent for DVP Vacuum Technology.
Busch SECO SV1010C and DVP SB10 Comparison
This table compares the main performance figures. A replacement decision should also take account of dimensions, connection sizes, duty cycle, contamination risk and electrical supply.
| Model | Capacity 50Hz / 60Hz | Ultimate Vacuum | Motor 50Hz / 60Hz |
| Busch SECO SV1010C | 10 / 12 m³/h | 150 mbar abs. | 0.37 / 0.37 kW |
| DVP SB10 | 10 / 12 m³/h | 120 mbar abs. | 0.37 / 0.45 kW |
Busch SECO SV1010C Carbon Vanes, Filters, Spares and Repair
Many Busch SECO and TINY dry-running pumps remain in productive service for years, so maintaining the existing pump can be a sensible option. Our sister company VacAir Superstore supplies replacement components and provides workshop service and repair support for Busch dry-running rotary vane pumps.
Carbon vane condition is particularly important. Excessive vane wear can reduce vacuum performance and, if ignored, may result in damage to the rotor, cylinder or end plates.
Carbon Vanes
Replacement Busch carbon vanes for planned maintenance and overhaul work.
Filters
Inlet filters and replacement elements to help prevent dust and debris reaching the pump chamber.
Spare Parts
Service components, gaskets, seals and other replacement parts for Busch dry-running pumps.
Service & Repair
Inspection, vane replacement, fault diagnosis and workshop repair for worn or damaged pumps.
Busch SECO SV1010C Frequently Asked Questions
Is the Busch SECO SV1010C an oil-free vacuum pump?
Yes. It is a dry-running rotary vane vacuum pump that uses self-lubricating carbon vanes rather than oil in the pumping chamber.
What is the pumping speed?
The stated nominal capacity is 10 m³/h at 50Hz and 12 m³/h at 60Hz.
What vacuum level does it reach?
The stated ultimate pressure is 150 mbar absolute.
What DVP alternative can be considered?
The DVP SB10 is the primary alternative selected by pumping capacity and dry-running technology.
Do carbon vanes need replacing?
Yes. Carbon vanes are a wear component and should be inspected as part of planned maintenance, with replacement before they reach their minimum permitted length.
Can an existing Busch SECO SV1010C be repaired?
Often, yes. VacAir can inspect the pump, replace vanes and service parts, and assess whether repair or replacement is the better option.
Need a Busch SECO SV1010C or DVP SB10?
Contact Vacuum Pumps UK for replacement-pump advice, pricing, availability and technical support.
Send us the existing pump details and application and we will assess the most suitable option.
