DVP CB10 Dry-Running Rotary Vane Pressure Pump
Compact oil-free pressure pump for construction equipment and other machinery requiring a clean source of low-pressure compressed air.
The DVP CB10 is a dry-running rotary vane pressure pump with a compact monobloc construction. The rotor is assembled directly onto the motor shaft, reducing the number of separate components and helping keep the unit small and lightweight.
Cooling is provided by the integral motor fan. The pump can be installed where space is restricted, provided that sufficient ventilation is available around the unit.
Need help selecting a pressure pump?
Tell us the required airflow, pressure and application and we will help confirm the most suitable DVP model.
Technology
Dry Rotary Vane
Nominal Capacity
10 / 12 m³/h
Maximum Overpressure
0.6 bar
DVP CB10 Technical Specification
Performance varies according to electrical frequency. Confirm the motor, voltage and frequency required for the installation before ordering.
| Model | Nominal Capacity m³/h 50Hz / 60Hz |
Maximum Overpressure bar 50Hz / 60Hz |
Motor Power kW 50Hz / 60Hz |
|---|---|---|---|
| DVP CB10 | 10 / 12 | 0.6 / 0.6 | 0.37 / 0.45 |
Compact Oil-Free Pressure Pump Design
Monobloc Construction
The rotor is assembled directly onto the motor shaft, producing a compact arrangement with fewer separate drive components.
Integral Motor Cooling
An integral motor fan provides cooling during operation. Adequate ventilation must be maintained around the installed pump.
Protective Inlet Filter
A protective filter is fitted at the inlet to help prevent unwanted particles entering the pressure pump.
Typical CB10 Pressure Pump Applications
The DVP CB10 is principally intended for construction-industry equipment and other compact machinery requiring oil-free pressure air at up to 0.6 bar.
Confirm the Required Duty
Pump selection should be based on the required airflow, pressure, operating duty, electrical supply and available ventilation. Contact our technical team if the CB10 is replacing an existing pressure pump.
Accessories, Servicing and Technical Support
Optional Accessories
Accessories are available to support installation and operation of the DVP CB10 pressure pump.
Service and Repairs
Workshop inspection, servicing and repair support is available for DVP dry-running rotary vane pumps.
Replacement Advice
Send us the existing pump model, pressure requirement and machinery details and we can help assess the nearest suitable DVP replacement.
Official DVP Technology Master Agent
Vacuum Pumps UK is the official DVP Technology Master Agent for the UK and Ireland, supplying genuine DVP pressure pumps, spare parts, accessories and factory-backed technical support.
Our factory-trained engineers can assist with new pump selection, replacement advice, servicing and application support.
Frequently Asked Questions
Is the DVP CB10 an oil-free pressure pump?
Yes. The CB10 uses dry-running rotary vane technology and does not use oil within the pumping chamber.
What capacity does the CB10 provide?
The nominal capacity is 10 m³/h at 50Hz and 12 m³/h at 60Hz.
What pressure can the CB10 produce?
The stated maximum overpressure is 0.6 bar at both 50Hz and 60Hz.
Does the CB10 require ventilation?
Yes. Cooling is provided by the integral motor fan, so sufficient free airflow must be maintained around the pump.
Is an inlet filter included?
Yes. The CB10 is equipped with a protective filter at the inlet.
Can Vacuum Pumps UK help select a replacement?
Yes. Send us the existing pump details, required capacity and pressure duty and our technical team can advise on the nearest suitable DVP option.
Need a DVP Dry-Running Pressure Pump?
Contact Vacuum Pumps UK for DVP CB10 prices, availability, technical advice and replacement pump recommendations.
Send us your required airflow, pressure duty or existing pump model and we will help identify the correct DVP pressure pump.
