DVP CB16-1 Dry-Running Rotary Vane Pressure Pump
The DVP CB16-1 is an industrial dry-running rotary vane pressure pump (compressor) designed for continuous low-pressure air supply in construction equipment, automated machinery, printing, and specialized OEM systems requiring oil-free air discharge.
Delivering a nominal capacity of 16 m³/h at 50Hz (19 m³/h / 11.2 CFM at 60Hz) and a maximum continuous overpressure of 0.6 bar (0.7 bar at 60Hz), the CB16-1 delivers clean, pulsation-free air in a durable direct-drive monoblock package.
Vacuum Pumps UK is the official UK & Ireland Master Agent for DVP Vacuum Technology.
Replacing an existing dry compressor or pressure pump?
Send us a photograph of the pump nameplate and our engineering team will identify the nearest exact DVP replacement.
We cross-reference airflow capacity, operating pressure, motor rating, electrical duties, and mounting dimensions for a fast match.
Pump Type
Dry Running
rotary vane compressor
Nominal Flow
16 / 19 m³/h
50Hz / 60Hz (11.2 CFM)
Max Overpressure
0.6 / 0.7 bar
continuous gauge pressure
Motor Power
0.75 / 0.90 kW
50Hz / 60Hz
DVP CB16-1 Overview
The DVP CB16-1 is a dry-running rotary vane pressure pump (compressor) designed specifically for applications that demand oil-free air discharge, minimal space consumption, and high operational reliability. Built on a direct-drive monoblock architecture, the rotor is mounted directly onto the electric motor shaft, eliminating power transmission losses, belts, and extra coupling wear points.
Unlike oil-lubricated units, the CB16-1 uses high-grade, self-lubricating graphite carbon vanes operating inside a precision-machined chamber. This guarantees 100% oil-free output, preventing air contamination in sensitive processing and machinery environments.
Equipped with an integrated inlet filter to strain airborne dust before compression, an efficient rear centrifugal cooling fan, and an integral discharge silencer, the CB16-1 delivers clean, continuous airflow with minimal sound and thermal output.
Typical Applications
The DVP CB16-1 pressure pump is widely deployed across industrial sectors where clean, dry, low-pressure compressed air is required:
Construction Industry: Plaster mixing machines, rendering equipment, and site aeration systems
Printing & Paper Handling: Sheet separation, air-table flotation, and feeder mechanisms
Pneumatic Conveying: Low-pressure transfer of light powders, granules, and plastics
Automated Production Lines: Light blowing, part ejection, and clean air curtain systems
Environmental & Aeration: Water treatment sampling, sparging, and fluidization tanks
Packaging Machinery: Bag opening, carton inflation, and product positioning
Woodworking & Plastics: Dust blow-off, sheet floating, and auxiliary processing
OEM Machinery: Compact built-in pressure supply for specialized equipment
Why Choose the DVP CB16-1?
The CB16-1 offers a proven, highly efficient option for equipment builders and plant managers needing an oil-free compressed air source up to 0.7 bar. Its tight monoblock construction allows easy integration into machinery enclosures where space is constrained.
By pairing a heavy-duty motor with high-durability carbon vanes and effective centrifugal cooling, the CB16-1 provides low thermal stress, extended service intervals, and predictable maintenance costs.
Vacuum Pumps UK backs every CB16-1 unit with technical sizing support, complete stock of genuine DVP spare parts, complementary accessories, and nationwide workshop service support.
Key CB16-1 Features
Direct-Drive Monoblock
The rotor mounts straight to the motor shaft, resulting in a compact alignment that minimizes mechanical wear and eliminates drive belts.
Protective Inlet Filter
Built-in inlet filtration keeps particulates out of the compression cylinder, preventing premature vane wear and chamber scoring.
Centrifugal Cooling Fan
A powerful rear-mounted fan directs continuous cooling air across the cylinder fins, ensuring stability during continuous duty.
100% Oil-Free Air
Self-lubricating graphite vanes eliminate oil sumps, ensuring exhaust air is completely oil-mist free and safe for clean processes.
DVP CB16-1 vs DVP SC16: What’s the Difference?
Although the DVP CB16-1 and DVP SC16 share the same physical monoblock housing and 16 m³/h nominal motor frame, they are engineered for different pressure regimes:
- DVP CB16-1 (Compressor / Pressure Pump): Configured specifically for positive pressure generation (overpressure up to 0.6–0.7 bar g) with specialized internal valving and inlet filtering tuned for compressed air output.
- DVP SC16 (Vacuum Pump): Optimized for vacuum extraction down to 120 mbar absolute.
If your application requires simultaneous vacuum and blow air, or you are unsure which configuration your system demands, contact our engineers for guidance.
Dry-Running Carbon Vane Technology
The CB16-1 utilizes durable graphite carbon vanes that slide radially within rotor slots, riding along the inner cylinder wall on a fine film of carbon micro-particles. This self-lubricating mechanism eliminates liquid lubricants entirely.
Carbon vanes gradually wear as part of regular operation. Inspecting vane height during routine preventative maintenance prevents excessive wear that could compromise performance or damage internal surfaces. Vane service life depends on operating temperature, cleanliness of inlet air, duty cycle, and operating pressure.
Vacuum Pumps UK and our engineering unit, VacAir Superstore, supply OEM-quality replacement carbon vanes, inlet filter cartridges, gaskets, and rebuild components for the DVP CB series.
Repair or Replace Your Existing Compressor?
If your existing DVP or third-party pressure pump is experiencing loss of pressure or minor noise, replacing carbon vanes, cleaning internal ports, and renewing filters often restores full factory output.
However, if the unit has suffered cylinder scoring, bearing breakdown, severe overheating, or motor damage, replacing it with a new DVP CB16-1 offers immediate reliability, full factory warranty protection, and reduced downtime.
We can evaluate servicing costs against a brand-new unit to recommend the most cost-effective path forward.
Replacement Pump Guide
Replacing a Dry Industrial Compressor?
The CB16-1 is a direct drop-in candidate when you require up to 19 m³/h of clean oil-free air at pressures up to 0.7 bar in a compact footprint.
Replacing a Becker DT 4.16?
Replacing a Becker DT 4.16 dry compressor? The DVP CB16-1 offers equivalent flow and pressure performance. We can verify port threads, footprint, and electrical matches for a seamless changeover.
Replacing an Elmo Rietschle DLT 15 / DLT 16?
The DVP CB16-1 provides a reliable alternative to Elmo Rietschle DLT series compressors. Our technical desk will compare porting, pressure range, and motor power to ensure direct compatibility.
Replacing a Busch Seco SD 1016?
Looking for a replacement for a Busch Seco SD 1016 compressor? The DVP CB16-1 delivers matching performance with reliable OEM build quality and straightforward spares access.
Not Sure Which Pressure Pump You Need?
Vacuum Pumps UK regularly assists engineers in cross-referencing obsolete, failing, or costly dry rotary compressors from all leading global brands.
Send us a photograph of your pump nameplate along with details on your system operating pressure and duty cycle. We will verify flow rates, motor voltages, and physical dimensions before providing a fast recommendation.
Carbon Vanes, Filters, Service Kits & Support
Replacement Carbon Vanes
Precision-ground self-lubricating carbon vanes in stock for the DVP CB16-1. Routine inspection and timely vane replacement prevent cylinder damage.
Inlet Filter Elements
High-efficiency replacement inlet filter elements to protect internal vanes from dust and particulate accumulation.
Maintenance Kits
Complete DVP service kits containing vanes, filter elements, gaskets, and shaft seals for preventative maintenance.
Workshop Repairs
Full workshop overhaul and repair capability provided through our sister company, VacAir Superstore.
DVP CB16-1 Frequently Asked Questions
What type of pump is the DVP CB16-1?
The DVP CB16-1 is a dry-running rotary vane pressure pump (compressor) designed to supply oil-free low-pressure compressed air.
What airflow capacity does the CB16-1 deliver?
It provides a nominal air capacity of 16 m³/h at 50Hz and 19 m³/h (11.2 CFM) at 60Hz.
What is the maximum pressure output of the CB16-1?
The CB16-1 reaches a maximum continuous overpressure of 0.6 bar at 50Hz and 0.7 bar at 60Hz.
Does the CB16-1 require lubricating oil?
No. The unit uses self-lubricating graphite carbon vanes and operates completely dry without oil inside the compression chamber.
What electric motor power is fitted?
The standard motor is rated at 0.75 kW on 50Hz supplies and 0.90 kW on 60Hz supplies.
How is the compressor cooled?
A powerful rear-mounted centrifugal fan draws ambient air across cooling fins on the pump casting to maintain ideal operating temperatures.
What main applications use the CB16-1?
Key applications include construction equipment (such as plaster spraying machines), printing presses, paper handling, air tables, packaging, and pneumatic conveying.
Can the CB16-1 replace other compressor brands like Becker or Rietschle?
Yes. The CB16-1 frequently replaces equivalent 16 m³/h dry rotary compressors such as the Becker DT 4.16, Elmo Rietschle DLT 15/16, or Busch Seco SD 1016. Our engineers can verify mounting and technical specs before installation.
Are replacement vanes and filters available in the UK?
Yes. Vacuum Pumps UK holds stock of genuine DVP replacement carbon vanes, inlet filter elements, seals, and rebuild kits for fast UK dispatch.
Who provides repair and servicing for DVP compressors?
Vacuum Pumps UK provides technical selection, warranty support, and spare parts, while our specialist sister company VacAir Superstore provides full UK workshop service and repairs.
Need a DVP CB16-1 or Replacement Pressure Pump?
Contact Vacuum Pumps UK for pricing, current stock, technical advice, or cross-reference support.
Send us your existing pump details and our team will recommend the exact replacement.
