DVP PA Series Dry-Running Vacuum Claw Pumps
The DVP PA Series (PA 155 and PA 315) offers high-performance dry-running vacuum claw pumps designed for oil-free operation, continuous duty cycles, and exceptional energy efficiency.
Delivering nominal pumping speeds from 155 m³/h up to 300 m³/h (109.6 to 176.7 CFM), the PA series features non-contact rotor geometry to ensure friction-free performance, minimal maintenance downtime, and constant volumetric capacity throughout its operating life.
Vacuum Pumps UK is the official UK & Ireland Master Agent for DVP Vacuum Technology.
Replacing an existing dry vacuum claw pump?
Send us a photo of your existing pump nameplate and our engineering team will identify the exact DVP PA drop-in replacement model.
We cross-reference capacity flow rates, ultimate vacuum ratings, motor sizes, and port configurations for a smooth retrofit.
Technology
Dry Claw
friction-free non-contact rotors
Nominal Capacity
155 – 300 m³/h
109.6 – 176.7 CFM
Vacuum Regulation
150 – 500 mbar
integrated regulating valves
Motor Range
4.0 – 6.6 kW
50Hz / 60Hz energy efficient
DVP PA Series Overview
DVP PA Series claw vacuum pumps operate using non-contact positive displacement. Gas enters through an adjustable inlet fitting and is moved to the discharge port by two claw-shaped rotors spinning in opposite directions inside a molded chamber. Gear-driven synchronisation ensures the rotors never make physical contact with each other or the housing casing, eliminating internal mechanical friction, rubbing wear, and carbon particle generation.
The synchronisation gears run in sealed oil compartments separated from the main vacuum chamber by shaft gaskets. This isolates process air from oil vapor, ensuring clean, dry vacuum performance while maintaining smooth mechanical drive delivery.
Factory-installed hardware includes an adjustable inlet fitting, an exhaust silencer to keep ambient noise low, robust rubber shock mounts, and an integrated vacuum regulating valve (150–500 mbar Abs. for PA 155; 200–500 mbar Abs. for PA 315) to maintain steady operating pressure under varying load conditions.
PA Series Technical Specifications
Compare performance parameters across the PA 155 and PA 315 models:
| Model | Nominal Flow 50Hz (m³/h) |
Nominal Flow 60Hz (m³/h / CFM) |
Vacuum Regulating Range (mbar Abs.) |
Max Overpressure 50Hz / 60Hz (bar) |
Motor Power 50Hz / 60Hz (kW) |
|---|---|---|---|---|---|
| PA 155 | 155 | 186 / 109.6 | 150 – 500 | 1.3 / 1.1 | 4.0 / 4.5 |
| PA 315 | 250 | 300 / 176.7 | 200 – 500 | 1.3 / 1.2 | 5.5 / 6.6 |
Key Application Fields
DVP PA dry claw vacuum pumps excel across continuous manufacturing and processing applications requiring oil-free, contact-free vacuum performance:
Woodworking & CNC Routing: Vacuum hold-down tables, nesting operations, and timber processing machinery
Thermoforming & Plastic Processing: Sheet vacuum forming, sheet clamping, and plastic extrusion degassing
Food & Pasta Manufacturing: Pneumatic raw ingredient handling, continuous pasta extrusion vacuum, and automated packaging
Packaging Machinery: Pick-and-place systems, tray sealing, carton erect machines, and continuous vacuum handling
Medical & Dental Suction: Centralised surgical and dental clinic vacuum networks requiring reliable, oil-free performance
Chemical & Pharmaceutical: Solvent degassing, powder transfer, and oil-free process vacuum lines
Environmental & Remediation: Soil vapor extraction (SVE), water aeration, and remediation vacuum systems
Pneumatic Vacuum Conveying: Continuous transfer of plastic granules, powders, and dry food products
Why Choose DVP PA Vacuum Claw Pumps?
Unlike dry rotary vane pumps that rely on consumable graphite vanes that gradually wear down and produce carbon dust, claw technology operates non-contact. The claw rotors revolve inside the casing without touching, ensuring that pumping capacity stays constant year after year without efficiency degradation.
With no sliding friction inside the chamber, operating temperatures stay controlled, power consumption remains low, and service intervals are extended primarily to gearbox oil changes and filter replacements.
Vacuum Pumps UK backs the PA series with complete UK technical support, original DVP spare parts, inlet filters, system accessories, and fast overhaul services.
Key Technical Features
Non-Contact Claw Design
Precision rotor clearances eliminate mechanical friction, ensuring steady performance without component wear.
100% Oil-Free Vacuum
Sealed gearbox compartments isolate gear oil from the vacuum chamber, delivering clean, uncontaminated suction air.
Integrated Vacuum Regulation
Factory-equipped with adjustable vacuum regulating valves to maintain stable system vacuum under changing line demand.
Low Energy & Servicing Costs
High volumetric efficiency minimises electrical consumption while non-contact parts keep servicing simple and inexpensive.
Replacement & Cross-Reference Guide
Replacing Busch Mink Vacuum Pumps?
Upgrading or replacing Busch Mink dry claw pumps (e.g., MM or MINK series)? The DVP PA range provides direct equivalent flow rates and vacuum capability.
Replacing Elmo Rietschle C-VLR Units?
The DVP PA 155 and PA 315 models serve as drop-in retrofit alternatives for Rietschle C-VLR claw vacuum pumps. Our engineers assist with port alignment checks.
Replacing Becker BCA Pumps?
Replacing Becker dry claw vacuum units? The DVP PA series matches original performance profiles while optimising electrical consumption.
Upgrading Dry Rotary Vane Systems
Upgrading CNC routing tables or packaging lines from dry rotary vane to dry claw technology removes ongoing carbon vane replacement expenses.
Need Assistance Sizing Your DVP PA Vacuum Pump?
Vacuum Pumps UK assists engineers daily with vacuum system design, sizing, and model cross-referencing.
Take a photograph of your current pump nameplate and send it to our team. We will check airflow volume, vacuum limits, motor specifications, and port layouts to recommend the ideal DVP PA unit.
Spare Parts, Accessories & Service Support
Gear Oils & Shaft Seals
High-grade synthetic gear lubricants and shaft seal replacement kits engineered for DVP PA claw gearboxes.
Inlet Filter Assemblies
Heavy-duty intake filter canisters and cartridges to protect internal claw clearances from airborne particulates.
Service & Maintenance Kits
Complete DVP maintenance kits with replacement filters, seal rings, gaskets, and service components.
UK Workshop Service & Repair
Full overhaul, precision timing synchroniSation, and vacuum testing carried out by our service division, VacAir Superstore.
DVP PA Series Frequently Asked Questions
How does a dry claw vacuum pump work?
DVP PA claw pumps feature two synchronised claw-shaped rotors that rotate in opposite directions inside a chamber without making contact. Gas is drawn through the inlet, trapped between the claws, compressed, and expelled through the exhaust outlet without internal friction or oil contamination.
What nominal capacities are available in the PA range?
The PA 155 offers 155 m³/h at 50Hz (186 m³/h / 109.6 CFM at 60Hz). The PA 315 delivers 250 m³/h at 50Hz and up to 300 m³/h (176.7 CFM) at 60Hz.
Are DVP PA claw pumps completely oil-free?
Yes, the vacuum compression chamber is 100% dry and oil-free. Gear oil is restricted to isolated gearbox housings separated from the air pathway by high-performance shaft seals.
What vacuum levels can the PA series achieve?
The PA 155 includes a vacuum regulating valve covering 150 to 500 mbar Abs., while the PA 315 features a regulating valve covering 200 to 500 mbar Abs.
Why choose a claw pump over a dry rotary vane pump for CNC routing?
Claw pumps maintain consistent suction capacity over time because non-contact rotors do not wear out. Dry rotary vane pumps suffer vane wear that degrades airflow over time and requires periodic carbon vane replacement.
What standard accessories come fitted on DVP PA vacuum pumps?
Standard accessories include an adjustable inlet fitting, an exhaust silencer, rubber anti-vibration shock mounts, and an integrated vacuum regulating valve.
Can a DVP PA unit replace a Busch Mink or Elmo Rietschle claw pump?
Yes. DVP PA pumps serve as direct drop-in retrofits for Busch Mink (MM/MINK series) and Elmo Rietschle (C-VLR series) claw pumps. Contact Vacuum Pumps UK to confirm dimensional alignment.
Where can I get spare parts and repair service in the UK?
Vacuum Pumps UK holds extensive UK stock of DVP original spare parts, while complete repair, timing synchronisation, and overhaul services are handled by our dedicated service provider, VacAir Superstore.
Looking for a DVP PA Dry Vacuum Claw Pump or System Retrofit?
Contact Vacuum Pumps UK today for stock availability, competitive pricing, or technical selection assistance.
Send us your pump nameplate photo for an exact model cross-reference.
