Elmo Rietschle 2BH1810-7HH17 G-BH1 Side Channel Blower
The Elmo Rietschle 2BH1810-7HH17 is a two-stage G-BH1 side channel blower designed to deliver clean, oil-free vacuum or positive pressure for industrial machinery and process applications.
With a 5.5 kW motor, maximum pressure of +260 mbar; the maximum vacuum figure is not included in our current product data, the 2BH1810-7HH17 is suited to medium-to-higher vacuum and pressure duties.
Vacuum Pumps UK can supply new Elmo Rietschle 2BH1810-7HH17 blowers and provide technical support for new installations and replacement blower applications.
New Elmo Rietschle blowers, accessories and technical application support from Vacuum Pumps UK.
Need a new or replacement blower?
Send us the Elmo Rietschle model number, motor details and information about your application.
We can quote the 2BH1810-7HH17 and help confirm the correct blower specification for your installation.
Blower Type
Two Stage
side channel blower
Maximum Vacuum
vacuum figure to be confirmed
vacuum operation
Maximum Pressure
+260 mbar
pressure operation
Motor Power
5.5 kW
motor
Elmo Rietschle 2BH1810-7HH17 Overview
The Elmo Rietschle 2BH1810-7HH17 forms part of the established G-BH1 range of side channel blowers, also commonly referred to as regenerative blowers.
The impeller accelerates the process air around the side channel, building differential pressure without oil in the compression chamber.
The two-stage arrangement enables the blower to develop a greater differential pressure than comparable single-stage configurations, making this model useful where the application demands increased vacuum or discharge pressure.
Its two-stage G-BH1 configuration is intended for industrial systems needing increased differential pressure while retaining dry-running, oil-free operation.
This model sits at the lower end of the 2BH1610 two-stage group and provides a useful balance of compact motor power with increased differential-pressure capability.
This two-stage model provides up to +260 mbar positive pressure. Where the blower is required for vacuum duty, the exact operating requirement should be checked against the selected configuration before ordering.
Because no oil is required within the compression chamber, the G-BH1 design provides clean operation with very little routine internal maintenance.
The 2BH1810-7HH17 is a two-stage model with a 5.5 kW motor and is capable of operating at pressure levels up to +260 mbar; the vacuum duty should be confirmed for the required configuration, subject to correct system design and operating conditions.
This performance profile makes the 2BH1810-7HH17 suitable for medium-to-higher vacuum and pressure duties, with final blower selection dependent on the required operating point, pipework, duty cycle and process conditions.
Vacuum Pumps UK can assist with the supply of new Elmo Rietschle 2BH1810-7HH17 side channel blowers for replacement and new equipment installations.
Elmo Rietschle 2BH1810-7HH17 Technical Specifications
The figures below provide a general technical reference for the Elmo Rietschle 2BH1810-7HH17. Motor voltage, electrical specification, connections and individual blower configuration should be confirmed before ordering.
| Model | Stages | Maximum Vacuum mbar |
Maximum Pressure mbar |
Motor Power kW |
| 2BH1810-7HH17 | 2 | — | +260 | 5.5 |
Elmo Rietschle G-BH1 2BH1810-7HH17 Features
Dry Running
No oil is required in the compression chamber, making the blower suitable for clean vacuum or pressure duties.
Contact-Free Operation
The operating principle avoids contacting compression components, helping minimise routine internal wear.
Vacuum or Pressure
The 2BH1810-7HH17 can be configured for suction-side vacuum or discharge-side positive pressure according to the application.
Single-Stage Design
The two-stage arrangement is used where increased differential pressure is required for higher vacuum or positive-pressure duties.
Low Routine Maintenance
Under correct operating conditions, G-BH1 blowers require very little routine internal maintenance.
Industrial Duty
Designed for reliable operation on industrial machinery, OEM equipment and process systems.
Typical 2BH1810-7HH17 Side Channel Blower Applications
The Elmo Rietschle 2BH1810-7HH17 can be used on machinery requiring clean, oil-free vacuum or low-pressure air. Final blower selection should always be based on the actual system operating point and installation conditions.
› Vacuum lifting and handling equipment
› Packaging machinery
› Printing and paper machinery
› Pick-and-place systems
› Light pneumatic conveying
› Drying and process air
› Waste water aeration systems
› Industrial process equipment
› General OEM machinery
New Elmo Rietschle 2BH1810-7HH17 Blower Supply
Vacuum Pumps UK can supply new Elmo Rietschle 2BH1810-7HH17 G-BH1 side channel blowers for existing machinery, replacement requirements and new equipment installations.
If you are replacing an existing blower, providing the complete model number and motor nameplate information helps us confirm the required specification.
For new applications, our team can discuss whether the required vacuum or pressure duty is suitable for the proposed side channel blower installation.
Contact us with your existing blower details or application requirements for price and availability.
Elmo Rietschle G-BH1 Blower Accessories
Correctly selected accessories can help protect the 2BH1810-7HH17, control operating vacuum or pressure and simplify installation into existing machinery and pipework.
Inlet Filters
Filter housings and replacement filter elements help reduce dust and airborne contamination reaching the blower.
Vacuum Relief Valves
Vacuum relief valves can limit operating vacuum and help protect the blower from excessive differential pressure.
Pressure Relief Valves
Pressure relief valves provide protection where the blower is used to generate positive pressure.
Installation Accessories
Silencers, non-return valves, connection components and related accessories can be selected to suit the installation.
Elmo Rietschle 2BH1810-7HH17 Service, Repair and Spare Parts
G-BH1 side channel blowers are designed for very low routine maintenance requirements. Even so, an existing 2BH1810-7HH17 may eventually need attention because of bearing wear, motor faults, contamination, reduced performance, unusual noise or damage caused by unsuitable operating conditions.
Vacuum Pumps UK can assist with inspection, fault diagnosis, service and repair requirements for Elmo Rietschle side channel blowers.
Blower Service
Technical support for existing Elmo Rietschle G-BH1 side channel blowers, including inspection of operating condition and application-related issues.
Blower Repair
Inspection and repair assessment for noisy, damaged or poorly performing side channel blowers, including mechanical and motor-related faults.
Spare Parts
Replacement filters and spare parts for Elmo Rietschle vacuum pumps and blowers are available through our sister company VacAir Superstore.
Elmo Rietschle 2BH1810-7HH17 Frequently Asked Questions
What is the Elmo Rietschle 2BH1810-7HH17?
The 2BH1810-7HH17 is a two-stage G-BH1 side channel blower designed for industrial vacuum and pressure applications.
Can the 2BH1810-7HH17 be used for vacuum and pressure?
Yes. Side channel blowers can be used for suction-side vacuum or positive pressure from the discharge side. The 2BH1810-7HH17 has a stated maximum pressure of +260 mbar; the maximum vacuum figure is not included in our current product data.
What motor size does the 2BH1810-7HH17 use?
The stated motor power for this model is 5.5 kW.
Is the Elmo Rietschle 2BH1810-7HH17 oil free?
Yes. G-BH1 side channel blowers use dry-running, contact-free compression and do not require oil within the compression chamber.
Does the 2BH1810-7HH17 require regular servicing?
The G-BH1 design requires very little routine internal maintenance. Inlet filtration, installation condition and operating limits should still be checked as part of normal plant maintenance.
Can Vacuum Pumps UK supply a new 2BH1810-7HH17?
Yes. Vacuum Pumps UK can supply new Elmo Rietschle 2BH1810-7HH17 side channel blowers, subject to specification and availability.
Can an Elmo Rietschle 2BH1810-7HH17 blower be repaired?
Depending on the condition and nature of the fault, an existing blower may be suitable for inspection and repair. Vacuum Pumps UK can assist with Elmo Rietschle blower service and repair requirements.
What accessories are available for G-BH1 side channel blowers?
Accessories can include inlet filters, vacuum and pressure relief valves, silencers, non-return valves and installation connection components. The correct accessories depend on the application and whether the blower is operating under vacuum or pressure.
Need an Elmo Rietschle 2BH1810-7HH17 Side Channel Blower?
Contact Vacuum Pumps UK for price, availability, accessories, service and technical application advice.
Send us your existing blower model or application details and our team will help with your requirement.
